EXPO-LINK LTD. +7 495 9874270 www.papservice.com

Бумага и картон высшего качества на оборудовании со вторых рук.

PSV0203 ЗАВОД ДЛЯ ПРОИЗВОДСТВА ТУАЛЕТНОЙ
И САНИТАРНО-ГИГИЕНИЧЕСКОЙ БУМАГИ
 

Производительность – 900 – 1000 тн/месяц.  Материал – 100% макулатура.
Тип бумаги – туалетная.Завод был остановлен в конце декабря 2007 года.
Буммашина:
Тип машины - Fourdrinier yankee
Производительность – 36 тн/сутки.
Масса – от 18 до 45 гр/м2.
Обрезная ширина на накате – 2650 мм.
Максимальная рабочая скорость – 650м/мин.
Максимальная производительность при 45 гр/м2 – 48 тн/сутки.
Год изготовления – 1975 г.
  Stock preparation: 
-         Metallic belt conveyor, width 1.500 mm, with 7,5 c.v. motor
-         Helical pulper Lamort capacity 12 mr, built in stainless steel, with 275 c.v. motor with neumatic valve DN-500
-         Poire Lamort PV3, capacity 3 m3, stainless steel
-         Egger pump T7/200, with 20 h.p. motor
-         Conventional pulper capacity 17 m3, built in mild steel, with 150 h.p. motor
-         Licar Pump 6/100/150 with 65 h.p. motor
-         Conventional pulper capacity 26 m3, built in mild steel, with 325 h.p. motor
-         Licar Pump 7/150 – HP4, with 65 h.p. motor
-         Vibrating screen DGI size 1.000 x 1.500 mm, with 10 h.p. motor
-         Separaplast Maule Size III, capacity 100 – 120 Tpd, with 100 h.p. motor
-         Licar pump 250/150 with 20 h.p. motor
-         2 Deinking cells Lamort, stainless steel, with 22 injectors and regulation
-         Stainless steel tankcapacity 20 m3 with level box
-         Egger Pump TC-7-200 NP8 with 50 h.p. motor
-         Stainless steel tank capacity 4 m3
-         2 level boxes in stainless steel with valves
-         2 Egger pumps TE7/200 with 50 – 40 h.p. motors
-         High Density Cleaner Voith model S2, flow 800 l/min
-         Krofta SPC24, with dilution tank
-         Drum thickener 1.200 mm diam. and 4.500 mm width, 10 h.p. motor
-         2 Beloit Jones DD3000 refiners, size 20” with 250 h.p. / 988 r.p.m. motor
-         38 Andritz Cleaners in four stages model R-28-50
-         Vertical screen Voith model Multiscreen type MSS-06/06, 30 kW motor, slotted basket
-         Vertical screen Voith model Minisorter type MST-05/05, 30 kW motor, slotted basket.
-         Fractionator Trenner 6000, stainless steel, 2 m3   
Tissue Paper Machine: 
Fourdrinier yankee type machine, average production 36 Tpd, grammage range from 18 – 45 GSM, width on pope reel 2.650 mm and maximum working speed 650 m/min. Maximum production with 45 GSM: 48 TPD. 
Machine built in 1975 but overhauled many times over the years 
-         Cleaners in 3 stages with rejectomat in the last stage
-         Fan pump ABS BA 250/250-32 with 125 h.p. motor 
Pressurized head box ESCHER WYSS slice width 2.700 mm, with pulsation absortion tank. Maximum flow: 27.000 l/min.
Wire part is not cantilever, built by Emua, with stainless steel foils, vacuufoils and suction boxes. It is composed by: 1 forming box, 6 foils, 2 vacuufoils and 5 suction boxes
Suction Couch cylinder is 650 mm diameter. Individually driven by a 40 h.p. DC motor.
Two-nip press section.
First nip is suction press roll against yankee at 90/100 KN/m. New covering in 2005. Individually driven by a 200 hp DC motor.
And second nip is blind drilled press roll against yankee at 100 KN/m.
Yankee cylinder diameter 4.500 mm and 2.950 mm face width. Working pressure: 4 bar. Rectified in 2002. Individually driven by a 200 h.p. DC motor.
Aerothermic hood with 4 fans. Blown air heated with gas burners. Has heat recovery system. 2 doctor blades are in place. One creping doctor blade and one cleaning doctor blade.
Broke pulper Emua type JP 120, capacity 2 m3, with 60 h.p. motor
Gorostidi conventional pope reel with a 40 kw DC motor
Hydraulic Group
4 Vacuum pumps: Safem and Nash, power 45 – 125 – 175 – 215 h.p.
Pumps
Machine has DC multimotor drive. With five attacking points: suction couch cylinder, turning roll, press 1, Yankee and pope reel.
Rewinder Pasaban, working width 2.750 mm, with 2 belt unwinding stands with regenerative brakes of 18,6 kw, 14 sliters, 65 h.p. single drive motor, maximum working speed 1.000 m/min, reel lowering table and reception. 
Compressors: 
1 Betico 40 h.p. / 1.460 r.p.m.
2 Betico 20 h.p. / 1.460 r.p.m.
1 ABC 10 h.p. 
Complete steam and condensate system:   1 New boiler Babcock – Wanson, type BWS model D-60, steam production: 6 Tm/h, working pressure 15 bar, installed new in 2004, working on natural gas.