Завод для производства писчих видов бумаги
Бумагоделательная машина изготовлена в 1998 году.
Реконструирована в 2003 – 2004 г.г.
Тип машины - Fourdrinier yankee 
Основные характеристики:
Обрезная ширина – 2340 мм.
Рабочая скорость:
  - 350 м/мин. при 40 гр/м2 (максимальная скорость)
  - 120 м/мин. при 120 гр/м2 (минимальная скорость)
  - 280 м/мин. при 70 гр/м2 (средняя, оптимальная скорость)
Производительность – 65 тн/сутки.
Производительность по готовой продукции – 55 тн/сутки.  
Машина остановлена в августе 2006г.

STOCK PREPARATION:  
-         1 LICAR-LAMORT Helical pulper of 10 m3. (Year 1980)
-         Driven by belts and pulley
-         Motor of 250 kw  
-         1 LICAR-LAMORT poire size 1
-         Driven by belts and pulley
-         Motor of 60 HP  
-         1 AIKAWA high consistency cleaner
-         1 LICAR-LAMORT CH7 with holes. Motor of 74 kw.
-         1 BELOIT S-24A with slots of 0,25 mm. Motor of 100 HP.
-         1 Vibrating screen M-10 of 2 X 0,5 m
-         1 Vibrating screen T-20 of 1 X 2 m.  
DEINKING LINE  
2 LICAR – LAMORT deinking cells.  
1 Foam collector.  
2 Drum thickeners:
-         1 of 5600mm face width x 1200 mm diam. 380V / 1450RPM / 7,5kw.
-         1 of 2800mm face width x 1200 mm diam. 380V / 1445RPM / 5,5kw.  
Disc refiner.
Manufacturer: BELOIT-JONES
Type: DD4000
Diam: 16”
Motor power: 110 kw  
1 Sludge screw that take the foam from the foam collector.
Manufacturer: Pieralisi
Type: Jumbo4
Year of manufacture: 2002
Max. RPM: 3350
Working density: 14 kg/dm3
Drive: 380-420V / 1480RPM / 45kw  
HEAD OF MACHINE CIRCUIT  
Fan pump of 132 kw.  
GL&V Cleaners in three stages.
LICAR-LAMORT SP-800 with motor of 22/25 kw. (primary head of machine screen)
LICAR-LAMORT Diabolo screen. (secondary head of machine screen)
1 Vibrating screen T-20 of 1 X 2 m. (tertiary head of machine screen) 
PAPER MACHINE  
Wire section
Type: fourdrinier.
With shaking motor power: 10 CV.
Headbox with 2 rectifier rolls.
Manufacturer: Bruderhaus.
Lip width: 2500 mm.  
Press section  
Pick-up press with suction of 650 mm. diam. and 2.990 mm. width  
Bi-nip press with central roll and two contacts.  
-         1st nip with two suction areas of high and low vacuum and working pressure of 30 kg/cm.  2.990 mm width and 650 mm diam.
-         2nd nip press with top felt and working pressure of 45 kg/cm. 2.700 mm width and 640 mm diam.
-         Central roll of 2.800 mm width and 1.000 mm diam.  
Drying section
5 Dryers of 1500 mm diam. and 2650 mm face width (without including the rope throat)
Test pressure: 8 kg/cm2.
Max. working pressure: 5 Kg./cm2  
MG Cylinder
1 MG Cylinder of 4.200 mm diam. and 2.650 mm face width + 10 mm. rope throat  
Scanner
By Toniolo Iberica for the grammage and moisture control.    
Pope reel
Standard pope reel with primary and secondary arms.  
Drive
Multimotor drive with 7 ABB motors.
Suction roll: 90 kw
Wire: 132 kw
Press 1: 90 kw
Press 2: 50 kw
Dryers: 90 kw
MG Cylinder: 132 kw
Pope reel: 37 kw  
SUPERCALENDER STACK:  
Manufacturer: unknown, completely rebuilt by Gorostidi
Face width: 2250 mm
Nº of rolls: 12
Top and bottom rolls of fixed crowning. Face width 2250 mm and 500 mm diam.
Middle rolls of 2550 mm face width and 320 mm. diam.
Unwinding stand for machine spool with standard tambour brake.
Rewinding against drum. Pope type.
Drive with only one INDAR motor.
  BRUDERHAUS WINDER  
Manufacturer: Brüderhaus
Year of manufacture: 1965/1975
Face width of winding drums: 2250 mm
Unwinding stand for machine spool with standard drum brake.
Shaftless rewinding up to 1200 mm diam.
With lowering table.
Drive with one INDAR motor of 45 CV.  
WINDER  
Manufacturer: Jagenberg - Emua
Year of manufacturer: 1975
Type: Vari-dur
Face width of winding drums: 2250 mm
Winding drums diam.: 420 mm
Unwinding stand for machine spool with ABB regenerative brake of 90 kw.
Max. unwind diam.: 2000 mm.
Shaftless rewind up to 1500 mm diam.
With lowering table.
Drive with double ABB motor of 37 kw.
All the drive and control is by ABB recently installed.   
REWINDER  
Manufacturer: Pasaban
Face width of rewinding drums: 1800 mm
Rewinding drums diam.: 300 mm.
Unwinding stand for machine spool with standard drum brake.
Max. unwind diam.: 1500 mm.
Shaftless rewind up to 1500 mm diam.
With lowering table.
Drive with two motors of 35 CV.  
PLASTIFIER  
2 oxidant groups to improve the bonding of the paraphine or plastic to the paper.
1 GHIOLDI. paraphiner
Trim width: 1,15 mm.
Unwinding stand with double arm and automatic reel change. Non-stop system.
Pope reel type rewinded up to 1200 mm.  
TRANSFORMATION STATION
4 Transformers of 1000 KVA each one from 22000 V to 380 V.  
MOBILE PARK  
1 LINDE electric forklift T30/36C of 2000 kg.
1 LINDE diesel forklift H40 D03 of 4000 kg. Year 1998
1 LINDE diesel forklift H30 D03 of 3000 kg. Year 1998
1 LINDE diesel forklift H40 D of 4000 kg. Year 1994  
BOILER  
Manufacturer: RCB
Combustible: fuel
Year: 2002
Burner: Weishaupt
Working pressure: 13 kg/cm2
Production: 12000 kg/hour  
VACUUM:  
1 SAFEM pump AL-21/22 type with one motor of 74 kw and driven by belts and pulley
1 SAFEM pump AL-40/42 type with one motor of 132 kw and driven by belts and pulley
1 SAFEM pump AL-30/32 type with one motor of 132 kw and driven by belts and pulley
1 SAFEM pump AL-40/42 type with one motor of 132 kw and driven by belts and pulley.    
TANKS:  
There are some tanks, all of them stainless steel  made. Eg.: 150m3, 30 m3,….  
BRIDGE  CRANE  
1 of 6 Tn. with 1 hook and 10 m. width.
1 of 6 Tn. with 1 hook and 14 m. width.  
SPARES:  
One complete axis set on spare for the pulper.