EXPO-LINK LTD. +7 495 9874270 www.papservice.com

Бумага и картон высшего качества на оборудовании со вторых рук.

PSV0205 ЗАВОД ДЛЯ ПРОИЗВОДСТВА ТУАЛЕТНОЙ И САНИТАРНО-ГИГИЕНИЧЕСКОЙ БУМАГИ

1.  Комплексная массоподготовка для двух бумагоделательных машин из 100% целлюлозы.

  2.   Бумагоделательная машина РМ – 1:
            Установлена в 1975 г.
            Проведен капитальный ремонт в 1984 – 1986 г.г.
·        Изготовитель - Gorostidi .
·        Материал – 100% макулатура.
·     Масса – от 18 до 140 гр/м2.
·     Обрезная ширина на накате – 2250 мм.
·      Максимальная скорость – 420 м/мин.
 
 3.    Бумагоделательная машина РМ – 2:
            Проведена модернизация в 2004 г.
            Новая сушильная секция.
·        Изготовитель - Escher Wyss.
·        Материал – 100% макулатура
·     Масса – от 15 до 140 гр/м2.
·     Обрезная ширина на накате – 2500 мм.
·      Максимальная скорость – 400 м/мин.


STOCK PREPARATION FOR THE 2 MACHINES: 
1 Helical pulper Varein nº 4 for virgin pulp, built on stainless steel, capacity 5 m3, with power motor 650 c.v. 
Pump Licar model TES – 7 – 200 4 HP, with power motor 60 h.p. 
Tanks on cement stainless steel with pumps with the pumps Licar 
1 Conventional pulper nº 3 built on stainless steel, capacity 30 m3 with power motor 250 h.p. 
Pump Licar model TES – 7/200 with power motor 40 c.v. 
Stainless steel tanks nº 2.1 and nº 2.2 capacity 2000 kgs of pulp at 2 % with agitator SS power motor 55 c.v. 
1 Conventional pulper nº 2, built on stainless steel, capacity 4 m3, powered by 100 h.p., with pump Licar T-5 / 125 with power motor 12,5 h.p.  
Stainless steel tank nº 1.1, capacity 500 kg at 2 % with agitator powered 15 h.p., with the pump Licar powered 170 h.p. 
1 pulper nº 1 built on Iron for pulp virgin – rejects and chemical products, capacity 5 m3, and power motor 135 h.p. 
3 tanks on cement, capacity 1000 kgs with agitator power 15 c.v. the number of  nº: 2 – 3 – 4 
Pumps Licar with power motor 
1 disc refiner Jylhavaara DD-720 28”, production 1,3 – 1,8 Tph, with power motor 400 h.p. 
The stock preparation include: pipes, valves, starters, controls, ….
 
PM1: 
Machine  installed in 1975 and overhauled in 84 – 86, width on pope reel 2.250 mm, speed maximum 420 m/min. 
Composed by: 
2 tanks on cement nº 5 and 6, capacity 1.500 kgs of pulp at 2% with Licar pumps 
Header conical refiner Jylhafinner with power motor 100 h.p. 
Cleaner section CELLECO in 2 stages with 4 and 1 cleaner on each position with pump 
Vertical screen with power motor 30 h.p. 
Paper machine: 
Head box with level, parts in contact to the pulp on stainless steel 
Fourdrinier length 10 mts, with forming board, 7 foils, 7 suction boxes, 1 vacuufoil, suction cough roll diameter 710 mm powered 88 h.p. and vacuum pump Safem 30-31 
Pick up press composed by 2 suction cough rolls diameter 840 mm, drive 68 h.p. and inferior roll diameter 590 mm, 6 rolls and vacuum pumps Safem 20-21 powered 50 h.p. 
1st dryer section composed by 5 dryers diameter 1.200 mm, with hood 
Yankee dryer diameter 3.000 mm, with press diameter 450 mm 
2nd dryer section composed by 3 dryers, 1 is cooler with hood 
Pope reel with spools 
Control Toniolo HMB 1053 
General drive power 300 h.p. at 1.500 r.p.m.  

WINDER :
Manufacturer: TALLERES GOROSTIDI S.R.L. (License BRUDERHAUS)
Year of manufacture: 1.974
Trim width: 2.250 mm.
Max. outlet diam.: 1.500 mm.
Speed: 1.000 m./min.
1 Motor: ARIN – IRURA (Tolosa). Year: 1.985; C.V.: 45; R.P.M.: 1.500
Support rolls diam.: 32 cm.
Press rolls diam.: 23 cm.
Nº of knives: 6
Totally rebuilt in 1.999
 
PM2 : 
Machine was reinstalled and completely overhauled and modernized in 2004, machine width 2.500 mm, with new sectional drive,
speed maximum 400 m/min.
 
Composed by: 
1 Disc refiner Beloit – Jones DD 26” , power motor GEE of 450 c.v. at 735 r.p.m. 
1 Stainless tank nº 3 URTO capacity 50 m3, with agitator power motor 45 c.v. 
1 Pump TURO model T8-125 HP4 power motor 30 c.v. 
1 Pump TURO model T7-150 HP4 power motor 40 c.v. / 1.450 r.p.m. 
1 Stainless steel tank nº4 URTO capacity 48 m3, with agitator power motor 30 c.v. / 1.400 r.p.m. 
1 Pump TURO model TES-125 HP4 power motor 30 c.v. / 1.450 r.p.m. 
1 Stainless steel tank URTO capacity 45 m3 
1 Pump TURO model T7-100 HP4 power motor 40 c.v. / 1.480 r.p.m. 
1 Stainless steel tank URTO capacity 150 m3 
1 Pump power motor 45 c.v. 
1 Pump ITUR model IR-4406/3 power motor 60 c.v. 
1 Pump NORMECANICA model SR 100/5 LL power motor 30 c.v. 
1 Pump EMICA model 125/40 with power motor 30 c.v. 
1 conical refiner Jylhavaara Jylhafinner with power motor 100 c.v. / 740 r.p.m. 
1 Pump TURO-LICAR model T9-125 HP4 power motor 60 c.v. 
3 stages cleaner section 
1 Pump TURO 1ST stage cleaner section 
1 Pump TURO model TE8-125 HP36 2nd stage cleaner section power motor 25 c.v.
1 Pump TURO model TE7-125 3rd stage cleaner section  power motor 15 c.v. 
3 Water Pump TURO TE7/200 and TE7/100 
1 fan pump Ahlstrom model ZPP-11-250 for 250 l/seg at 17 – 20 m.c.a.  with power motor 150 c.v. at 1.500 r.p.m. 
Pipes, valves completely installation 
Paper machine: width on pope reel 2.550 mm, speed maximum 400 to 190 m/min, basis weight from 17 – 50 gr/m2 composed by: 
Head box with constant level Escher Wyss Blanes type 220-01, flow 5.894 – 9.295 l/min 
Fourdrinier  with total length 10 mts with: forming board, 7 foils with 4 lames, 3 hydrofoils, 9 suction boxes, guide rolls for return, stainless steel and cantilever, power 100 c.v. 
1 suction press diameter 650 mm and table width 3.409, drive motor 100 c.v. 
4 vacuum pump SAFEN AL 30-31 with power motor 270 c.v. /  1.470 r.p.m. 
1 pick up with suction press diameter 650 mm and table width 3.365 mm, with 11 rolls 
2 superior and inferior return felt 
1 suction press diameter 586 mm and table width 3.050 mm, with 9 rolls with 2 power motors 100 and 75 c.v. 
1 Yankee dryer diameter 3.190 mm and width 2.829 mm drive 100 c.v. / 1.500 r.p.m. 
1 Brunnschweiler hood with 4 burners 40 c.v. 
1 Pope reel width table 3.000 mm with drive motor 
Spare pumps, regulators, ….